Checklist · Builders and renovators · Buildxact and Xero · Connecting tools
How do I connect Buildxact and Xero so I stop typing the same job and client details twice?
The short answer
For a clean Buildxact Xero integration, connect Xero under Integrations, then Application Integrations (2-step verification is required), set your supplier and contractor expense accounts, tax types and a Job tracking category, and start with invoices sent as Draft. Check every contact is marked as a supplier or contractor and none are archived in Xero. Turn on invoice payment syncing, then press Sync once a day or every couple of days.
Who this is for: Builders and renovators in Australia who quote and run jobs in Buildxact, keep the books in Xero, and are still typing purchase orders, invoices and client details into both.
What this looks like
A client signs off a kitchen renovation. You set up the job and the client in Buildxact, raise purchase orders for the cabinetmaker and the plumber, then someone types the same supplier bills and the progress invoice into Xero. A variation goes in one system and not the other. At month end, the job margin in Buildxact doesn't match what Xero says you spent.
The client feels it too: an invoice with the wrong address because it was retyped from an old email, or a payment reminder for an invoice they paid last week, because the payment was only recorded in one place.
Why it happens
The tools were set up at different times by different people, and nobody wrote down which one is the source of truth for what. So the safest habit becomes typing everything twice, which is slow and is exactly where mistakes creep in.
Even when the connection is switched on, a few settings decide whether it actually saves work: which accounts bills land in, whether contacts are linked properly, and whether anyone presses Sync. This checklist works through them in order.
The Buildxact Xero integration checklist
- Write a one-line map of where each detail lives. For example: client and job details start in Buildxact, purchase orders and client invoices start in Buildxact, payments are recorded in Xero, overheads like phone, rent and the ute lease are entered straight in Xero. Buildxact itself suggests general overheads are best entered directly in Xero. Stick the map near the office computer.
- Connect Xero. In Buildxact, select Integrations in the left menu, then Application Integrations, then Connect next to Xero, log in and select Allow access. Buildxact requires 2-step verification on your login for this: use an authenticator app and keep the recovery code somewhere safe.
- Create the Job tracking category in Xero first. In Xero, go to Accounting, Advanced, Tracking categories, Add Tracking Category, name it Job and leave the options blank, because Buildxact fills them in. Then choose it at the bottom of the Xero settings in Buildxact so every bill and sale carries the job number.
- Set the expense and income accounts. In the Buildxact Xero settings, choose an expense account for the Suppliers group and one for the Contractors group, and an income account such as Sales. Each needs a name and number; Buildxact notes that accounts starting with null won't work.
- Match the tax types. Set the taxed and untaxed expense and income tax types. There are two sets, one for jobs from estimates created before November 2020 and one for newer jobs, and Buildxact says both should match.
- Choose the invoice status and turn on attachments. Start with Draft while you're learning, so items wait for approval in Xero. Tick purchase order attachments so whoever does the books can check bills against supplier invoices. Set the Sync item date to today for a clean start, or backdate it to catch up older items. Select Save Settings.
- Check every contact before the first sync. Make sure each supplier and contractor is marked correctly, because that decides which expense account the bill goes to. Look for contacts archived in Xero: Buildxact says these cause sync errors, so un-archive them in Xero or update the Xero Link on the Buildxact contact. Missing contacts are created in Xero automatically.
- Turn on payment syncing. In Integrations, Application Integrations, Xero, enable Invoice payment syncing. When a client pays and the payment is recorded in Xero, Buildxact adds a matching receipt and marks the invoice partly or fully paid at the next sync.
- Decide on one direction for bills. Either send received purchase orders from Buildxact to Xero, or pull bills from Xero into Buildxact (for example if a receipt scanning app feeds Xero). Buildxact advises turning off purchase order syncing if you import bills, and contacting their support if you need both. Imported bills only include those created in the last 30 days that are Approved, Awaiting Payment or Paid.
- Put Sync on a routine. Nothing goes to Xero until someone presses Sync. Buildxact says once a day or every couple of days is typical, and to sync before an external bookkeeper starts work. Use View Log to find anything that seems to be missing.
Why each item matters
The map stops the habit of double entry coming back. The tracking category is what lets you see costs by job in Xero reports. The accounts, tax types and contact groups decide whether bills land in the right place, which is where most clean-up time goes. Payment syncing means nobody chases a client who has already paid. The routine matters most of all, because a connection nobody syncs is the same as no connection.
Expect small differences of a few cents on some bills: Buildxact calculates to four decimal places and Xero rounds to two.
How to tell it's working
After two weeks, check three things: no bill or invoice has been typed into Xero by hand for a job, the sync log shows no errors, and the paid status of your last few invoices matches in both systems.
At the end of the first month, compare one job's costs in Buildxact with a Xero report filtered by that job's tracking category. If they agree to within rounding, the tools are talking.
Copy and paste
Where our details live (stick near the office computer)
Write it before you connect, review it every quarter
[Business name]: where each detail lives Client and job details: start in Buildxact Estimates and variations: Buildxact Purchase orders: Buildxact, synced to Xero as bills Client invoices: Buildxact, synced to Xero as [Draft / Authorised] Client payments: recorded in Xero, synced back to Buildxact Overheads (rent, phone, vehicles): Xero only Who presses Sync: [name], every [day / Monday, Wednesday, Friday] at [time] Who checks the sync log: [name], every [Friday] If a contact won't sync: check it isn't archived in Xero
Weekly sync check
Every Friday, 10 minutes
[ ] Pressed Sync and the waiting count is zero [ ] View Log shows no errors this week [ ] No bills typed into Xero by hand for a job [ ] Draft bills and invoices approved in Xero [ ] New suppliers and contractors marked in the right group [ ] Last three paid invoices show as paid in Buildxact
Questions people also ask
Does Buildxact sync with Xero automatically?
Not on its own. Items wait until you press Sync, so you can fix mistakes first. Most businesses sync once a day or every couple of days.
Why won't a contact sync from Buildxact to Xero?
The most common cause Buildxact lists is a contact that is archived in Xero. Un-archive it in Xero or update the Xero Link on the Buildxact contact.
Should Buildxact invoices go to Xero as draft or approved?
Buildxact recommends Draft while you're learning, so you approve each one in Xero. Switch to Authorised once you trust the settings.
Can I see job costs by job in Xero?
Yes, if you set up a Job tracking category in Xero and choose it in the Buildxact settings, so each bill and sale carries the job number.
Sources
- Buildxact and Xero, Buildxact Help Centre
- How do I connect my accounting software to Buildxact?, Buildxact Help Centre